Adjustable Bicycle Storage Rack Vertical Wall Hanger
Don’t let bike storage be a problem for you. Get your bike off the floor and out of the way by going up. The Bicycle Storage Rack Vertical Wall Hanger makes it easy to load and unload your bike while freeing up much-needed space in your apartment or garage. The heavy-duty mount features an anti-scratch rubber hook to prevent damage to your rim while anti-slip treads help to hold your bike firmly in place.The spring-loaded hook can lock at multiple positions to work with any wheel size, can hold a maximum load of 65 lbs, and folds down to a slimmer profile when not in use. It also comes with hardware necessary to mount to wall studs.
- Weight: 1.26 lbs
- Dimensions:10.4” (H) x 4.7” (W) x 5.5” (D)
- 3.3 inch opening for tire
- Max Tire Width:2.5”
- 1x Wall Mount
- 4x Screws (3/16″ diameter)
- 4x Wall Anchors (9/32″ diameter)
Place the mount on the wall where you would like to install. Using a pencil or pen, trace each mounting hole on the wall.
Remove the wall mount, and drill a pilot hole where you traced. (Use a 1/8″ bit if drilling into a stud without wall anchors, or a 1/4″ bit for using the wall anchors)
If not drilling into a stud, push the wall anchors inside the holes.
Line up the bike wall mount with the drilled holes. Using a screwdriver, tighten the screw to secure the mount in the wall or anchors.
Operating Instructions: When in use, the weight of the bike should be resting on the anti-scratch rubber hook of the wall mount. To remove the bike, lift up to take the weight of the bike off the hook and move bike clear of the hook before letting your bike down.
WARNING: We highly recommend you install on a heavy wall panel or a stud. Panel or thin drywall without studs will NOT support weight properly. The maximum hanging weight of mount is up to 66 lb.
1 x Adjustable Bicycle Storage Rack Vertical Wall Hanger